Morning batch print
Use /admin/scanner/batch-print before doors at KLCC on 6, 7 and 8 November.
Print that day’s slips that morning, not the night before. Customers can
change their signing preferences until the first print locks them.
Role: Signing Staff, Payment Staff or Admin. These roles can load the list, print, resume and reprint, and correct eligible passes at A02. Superadmin accounts also carry Admin. If access is refused, ask the lead to arrange the right role; do not use another staff member’s login.
Complete Setup first. For printer or connection faults, use Troubleshooting.
Why print order matters
Section titled “Why print order matters”The production check on 3 November found 110 live signing items across 54 bookings, with 0 printed, 0 handed over and 0 keepsake numbers allocated. These are whole-event totals, not the number to print each morning; the selected day and filters decide the batch, and a shared artist-pass QR can cover several items.
The first prints allocate keepsake No. 1 onward for each artist at this event. Numbers follow first-print order, not booking date or the customer’s place in line. They continue across the three days and stay the same on reprints. The batch sorts by session start, artist, booking reference, then signing item. Keep that order: starting a later session first gives it the earlier numbers.
Choose this laptop’s work
Section titled “Choose this laptop’s work”- Open
/admin/scannerand click Batch-print signing slips. You should see the same heading on the batch page. If the tile is missing, check your role with the lead; the direct page address above also works. - Connect this laptop’s own CN811-UB printer by USB, load an 80 mm roll, and leave its printer bridge running. Click Check bridge. Expect Bridge ready — verify printer/paper; also check the cable, printer power and paper yourself. Bridge unavailable or Bridge not configured means stop and use Troubleshooting. Batch slips have no PDF fallback. A ready bridge alone does not prove paper can print.
- In Event, choose TCGKL 2026, listed as TCGKL Convention 2026. Set Day (MYT) to Fri 6 Nov, Sat 7 Nov or Sun 8 Nov, matching today. Check both even if they were already selected. If you see Select a published signing event and one of its event days., correct the selections. If the event is absent, ask the lead rather than choosing another.
- Set Session start (MYT) to All sessions, or the session the lead has assigned. Set Artist to this laptop’s assigned artist. If several laptops are printing, each needs its own printer and bridge, with no overlapping artist filters. For example, one can take Mahou and another Potato Art Club when those artists appear. Do not use All artists while another laptop is printing an artist batch. Finish and check one artist before changing filters.
- Check To print, Already printed, Handed over and Not printable. Only eligible, unprinted, unhanded slips enter a new batch. If you see No slips match these filters., check the day, session and artist, then click Refresh. Do not treat an error or an empty list as proof the work is finished. If Resume N slips appears instead of Print N slips, go to Check paper and resume before sending anything.
Here and below, N means the count or row number shown on your screen.
Make the pick list and print
Section titled “Make the pick list and print”- Click Pick list. Expect a table with Rack label, Ref, Buyer name, Signing and Package / status. It includes printed, handed-over and blocked rows as well as slips to print. If the event, day or artists are wrong, correct the filters and click Pick list again. This is a snapshot, not a live checklist.
- Click Print A4 pick list. Expect the browser’s print window with the roster on A4 pages. Choose an A4 printer, not the CN811 slip printer. If the preview is the wrong list, cancel, rebuild the pick list and try again. Keep this customer list at the staff desk, not on public display.
- Check the slip preview, but do not judge the print scope from it alone. Before a new batch, it shows the first filtered roster row, which may already be printed or blocked—not necessarily the first eligible slip. Check the event/day/session/artist filters and To print, Already printed, Handed over and Not printable counts, then click Print N slips. The confirmation reads Print N slips? Check paper and verify received slips first. Unverified sends will be retried as audited reprints. Check the count and accept only when the scope and printer are right. If wrong, cancel and correct them. Slips are sent one at a time; Saved batch records their order. Printing locks the preferences but does not record customer handover.
- Watch the paper and the progress. A sent count is not proof of delivery. If paper stops, jams or looks incomplete, click Stop and follow the paper checks below. Do not start another job to replace a doubtful send.
Check paper and resume
Section titled “Check paper and resume”-
Click Stop if a run is still active. Expect Stopping after this slip…; it finishes the current slip before stopping. Wait for the run to stop before checking rows or changing paper. If a printer error already stopped the run, go straight to Saved batch.
-
In Saved batch, match each physical slip to the numbered row, rack label and reference. Use this table to decide what to check:
State What to do Sent — check paper Find and check the complete, readable slip. Sending alone is not enough. Failed — check paper Paper may still have come out. Check the printer and stack before retrying. Queued or Failed — not sent Do not mark as received; no printer send is recorded for this row. Skipped — not sent Read the reason. Check at A02; this run did not send it. Verified Paper has already been checked in this browser. Do not reprint it just to finish the job. -
Once every sent slip through a row is present and readable, click that row’s Verify paper through #N. It verifies all unchecked sends up to that row, not just that slip; skipped rows remain skipped. Expect Verified on the checked rows. Never verify past missing or damaged paper. If the button is disabled, wait for printing to stop; you cannot verify through a row that has not been sent. “Settled” includes both verified and skipped rows, so it does not mean every slip printed.
-
Fix the paper, power, USB cable or bridge problem, then click Check bridge. Expect Bridge ready — verify printer/paper. If it remains unavailable, use Troubleshooting rather than switching to a new browser or laptop to restart this batch.
-
Click Resume N slips and check the confirmation before accepting. It continues in the saved order from the first row not verified or skipped. Any earlier unverified print attempt may come out marked
*** REPRINT ***, even if you never saw its first paper. The keepsake number stays the same. Check and verify the new paper before resuming again; keep only one usable slip per pass in the rack and set duplicates aside for the lead.
All slips sent but the button still says Resume? Check the paper and verify it first. Unverified sends remain in the saved job; clicking Resume without checking them can print them again.
Saved batch belongs to this browser, event and day and survives a reload. Keep using the same browser. Do not clear its storage. Session and artist filters stay locked while the saved job has unfinished rows. If a browser-storage error appears, keep the tab open, check the paper and ask the lead to restore browser storage before resuming. A saved job does not move with you to another laptop.
To deliberately abandon recovery, click Discard job. Read the warning, then choose Confirm discard, or Keep job to go back. Discarding forgets this browser’s progress only: it does not undo print records, handovers or keepsake numbers. Check all unverified paper first. A missing slip already recorded as printed must be recovered at A02 Slip, not assumed to be part of a fresh batch.
Deal with Not printable rows at A02
Section titled “Deal with Not printable rows at A02”These rows are withheld, not printer faults. Read the reason beside the count or in Package / status on the pick list. Do not invent missing customer choices.
| Reason shown | Next action |
|---|---|
| Signing details incomplete — followed by missing fields | At A02, check the choices with the customer and use Edit details, then Save details, as below. If the customer is not present, leave the pass for A02 later. |
| Payment incomplete — pay at A01 first | Send the customer to A01 Payment. Payment Staff or Admin must resolve the balance before retrying. |
| Bundle record missing — check at A01 | Give the reference to A01 and the lead. Do not try to print a separate bundle part to bypass the problem. |
| QR code revoked, Cancelled or Refunded | Do not print or hand over this pass. Ask the lead to check the booking. |
| Refund in progress | Leave it out of the batch and ask the lead to resolve the refund before any retry. |
- At
/admin/scanner/slip, scan that artist-pass QR. Expect A02 Slip and the matching artist, reference and session. If there is a payment error, resolve it at A01 first. If the pass is wrong, do not edit it. - Click Edit details on an eligible, unprinted pass. Confirm the missing choices with the customer: marker colour, signature language, Japanese orientation, dedication/name and sketch medium where offered. Click Save details. Expect Details saved — preview refreshed. Ready to print. If saving fails, the editor stays open: correct the reported field or ask the lead. If Edit details is absent, check whether the pass is already printed, handed over or no longer active; do not bypass the lock.
- Return to batch print and click Refresh, then Pick list for an updated roster. Expect the corrected pass under To print if it is still unprinted and otherwise eligible. If it remains blocked, read the remaining reason. Resume does not retry rows already marked Skipped — not sent: finish and settle the saved job before starting a new batch, or handle the pass individually at A02.
A02’s editor has no sketch-brief box. If that is the missing detail, leave the pass out of the batch. A02 staff can check the brief with the customer, use Print Slip for an individual slip and complete the paper instructions. Required dedications still have to be saved before the first print. Follow the Slip desk guide; do not guess a brief to clear the batch warning.
Approved payment-deferred bookings are allowed to print unpaid. The 3 November check found 10 payment-deferred bookings. At A02, Payment deferred — do not collect means follow the approved arrangement; these customers settle after the event. Do not send them to pay merely to make the batch work. A genuine payment block still goes to A01.
Put checked paper in the racks
Section titled “Put checked paper in the racks”- Use Rack label on the pick list and the matching row in Saved batch. It gives the Malaysian day, session start and artist. Put each verified slip in that artist’s rack, separated by day and session. If the paper’s artist or session differs, set it aside and ask A02 to check it.
- Within each group, keep the pick-list order. Match Ref and the signing number where shown; keepsake numbers are not one shared sequence across all artists. Signing n of N counts live signings in that booking’s matching artist/package/session, not a queue position. Cancelled, refunded and revoked items do not count. If paper is missing, use the saved-job recovery above.
- Give the racks, pick list and unresolved references to A02. A02 scans each artist pass and clicks Confirm Handed to Customer only after the correct paper and materials have actually been handed over. Batch printing and Verify paper through #N never record handover.
Quick card
Section titled “Quick card”Morning only: 6, 7, 8 Nov. Print today’s slips before doors, never tonight for tomorrow. Role: Signing Staff / Payment Staff / Admin.
- One laptop, one USB CN811, 80 mm roll, bridge running. No overlapping artists.
- Check bridge → Bridge ready — verify printer/paper. Check real paper too.
- Check Event, Day (MYT), Session start (MYT), Artist and counts; preview alone does not show print scope.
- Pick list → check scope → Print A4 pick list to an A4 printer.
- Not printable → note reason/reference for A02; payment blocks go to A01.
- Print N slips → check count and accept. First prints set each artist’s keepsake numbers.
- Trouble? Stop → wait for the current slip → check Saved batch and paper.
- Check every sent slip through a row → Verify paper through #N. Never pass a gap.
- Fix printer → Check bridge → Resume N slips. Unverified attempts become REPRINTs.
- Keep the same browser. Discard job → Confirm discard forgets recovery, not print records.
- Sort verified paper by Rack label, then Ref and Signing. Set duplicates aside.
- A02 hands over paper/materials, then Confirm Handed to Customer. Printing is not handover.
