Station setup and opening checks
For TCGKL 2026, 6–8 Nov at KLCC. All signing days and times are Malaysia time. Use one laptop and one CN811-UB printer, connected by USB, with 80 mm thermal paper. The small printer helper on the laptop is called the bridge.
Staff access
Section titled “Staff access”| Page and actions | Address | Required role — any one |
|---|---|---|
| A02 Slip — check details, print, reprint and confirm handover | Open A02 Slip | Signing Staff, Payment Staff or Admin |
| Batch-print signing slips — check the bridge and prepare the morning’s slips | Open batch printing | Signing Staff, Payment Staff or Admin |
Superadmin operators also hold Admin. Entry Staff or Entry Counter alone does not give access to these two pages. Ask the counter lead to arrange a missing role with a superadmin; do not use someone else’s account.
Connect the station
Section titled “Connect the station”- Connect the laptop and printer to power, then connect the CN811-UB’s USB cable to this laptop. Turn the printer on. You should see its power indication; if not, check the power supply before opening the website.
- Open the paper cover, put in an 80 mm thermal roll, pull a short end through the paper outlet and close the cover firmly. The roll must turn freely and paper must protrude. If it is trapped, reopen and reseat it; do not force it. Keep spare rolls within reach. A blank test print means the paper loading or thermal roll needs checking before the station opens.
One-time Windows installation
Section titled “One-time Windows installation”- Download the station pack:
tcgkl-signing-station.zip (always
matches the current scripts). In File Explorer, right-click it → Extract All
and extract it to a permanent folder on the laptop, for example
C:\TCGKL\installer. Do not run it from inside the zip. Signed in as the Windows account that will run the counter, double-clickinstall-station.batand approve the administrator prompt. Setup installs Python and starts the print bridge automatically whenever this Windows user signs in. Keep the folder in place afterwards. If setup reports a failure, stop and ask Tech rather than copying individual files. - If setup asks for Zadig, ask Tech to complete the CN811-UB USB-driver step. It must target this printer, not the keyboard, scanner or another USB device. If the printer cannot be identified, do not guess.
- Use Google Chrome in the same Windows account and Chrome profile used for
setup. Use a normal window, not Incognito or Guest. Open
tcgkl.com/admin. When Chrome asks to access devices
on the local network, click Allow for
tcgkl.com. If access was denied, ask Tech to restore the site’s local-network permission, then reload. - Setup ends with an automatic test print reading TCGKL station test OK. You should get one readable page on the CN811-UB, not a PDF window. Check the whole width and the bottom of the page. If it is blank, clipped or missing, use Troubleshooting before opening.
The installation details are in the station README on GitHub. Use that with Tech; staff should not need to type commands each morning.
Sign in with your staff account
Section titled “Sign in with your staff account”- In that Chrome window, open tcgkl.com/admin. If asked to sign in, enter your assigned staff account in Email address and click Continue. You should reach 6-digit code; if the code does not arrive, check spam and the address you entered. Continue with Google is also available; choose only the Google account assigned your staff role.
- Enter the emailed code and click Verify Code. Then open A02 Slip or Batch-print signing slips using the links above. You should see that page’s heading. If you are sent elsewhere or cannot open it, ask the lead to check the signed-in account and role. Reinstalling the printer will not fix missing staff access.
Opening checklist — every morning, 6–8 Nov
Section titled “Opening checklist — every morning, 6–8 Nov”Prepare that day’s slips that morning before doors, not the night before: customers can still change their signing choices until the first print.
- Check power, USB and paper. Turn on the printer and check the 80 mm roll, closed cover and spare rolls. Sign in to the station’s Windows account and open the same normal Chrome profile as setup. If the bridge has a visible window, leave it open; do not start extra copies.
- Check the bridge in the website. Open Batch-print signing slips and click Check bridge. Wait for Bridge ready — verify printer/paper. Checking bridge… is temporary. If you get Bridge unavailable, check that the bridge is running and Chrome has local-network permission, then click Check bridge again. Bridge not configured needs Tech.
- Check today’s work. Under Event, select the event for TCGKL 2026; check Day (MYT) is Fri 6, Sat 7 or Sun 8 Nov, as appropriate. Set Artist and Session start (MYT) to the lead’s assignment. Each laptop must have different artists. If Saved batch appears from an earlier attempt, check its paper before resuming; do not discard it to start over.
- Print one test slip. Ask the lead for an approved, ready-to-print pass for today’s rack. In A02 Slip, scan that artist-pass QR, check its artist and session, then click Print Slip. If it was already printed, the button is Reprint Slip instead. Expect Print request sent to CN811 — verify paper and a complete paper slip. Check readable text, correct day/time, no clipping and the keepsake at the bottom. A PDF window, missing paper or wrong day is a failed opening check: stop and use Troubleshooting.
- Keep the test slip and station ready. Put a valid first-printed slip in its assigned rack; keep any duplicate separate. Click Clear / next customer and, if prompted, Clear anyway to leave the pass without recording handover. Confirm Handed to Customer is only for paper and materials actually handed to the customer. Leave Chrome and the bridge running, with the laptop awake. If a batch stops, keep that tab and Chrome profile for recovery.
A02 Slip has no bridge-health badge. Its print notice appears only after a print attempt. The batch page’s ready badge proves the helper is reachable, not that the printer has paper or delivered a slip. Always inspect the paper.
Do not choose a random customer’s pass as a test: the first print locks their signing choices and allocates their keepsake number. Use only the pass approved by the lead; checking the bridge alone does not print anything.
Quick card
Section titled “Quick card”- One laptop + one CN811-UB; USB connected, power on, 80 mm roll loaded.
- Open the same normal Chrome profile used for setup — not Incognito or Guest.
- Sign in at
tcgkl.com/adminwith your staff account. - A02 and batch access: Signing Staff, Payment Staff or Admin.
- Open Batch-print signing slips → Check bridge.
- Expect Bridge ready — verify printer/paper; otherwise stop and call Tech.
- Check Event, Day (MYT) and your assigned Artist.
- In A02 Slip, scan the lead-approved test pass → Print Slip.
- Expect Print request sent to CN811 — verify paper; inspect the whole slip.
- No paper, PDF or poor print? Stop; use Troubleshooting.
- Rack the valid slip; do not confirm customer handover during setup.
- Leave Chrome and the bridge running; keep the laptop awake.
Counter lead: ____ / Tech: ____
